I would like to connect the mixer to a Samsung note 10+ via a cable like this: https://www.amazon.ca/UGREEN-Laserjet-OfficeJet-LabelWriter-Controller/dp/B072FNQLFC/ref=sr_1_2_sspa?keywords=usb+type+b+to+usb-c&qid=1590519056&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExRTYxUlFFSFNETUQ0JmVuY3J5cHRlZElkPUEwMzMzMjcyM05BWldRWFk0UVM0UCZlbmNyeXB0ZWRBZElkPUEwODk0NjIyWktQOUI0MUc5WkYmd2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl Would i need any special app on the phone to listen/record the audio coming into it from the mixer? I feel this is a better solution to get better audio as compared to using RCA to 3.5mm cable coming into the phone (as the phone will treat it as mic input). Thanks.
I'm hoping someone can help me out. I just got the XENYX QX1002USB today for multiple uses. It is a brand new unit delivered directly from Amazon. One of the primary uses is at home with my DJ setup which will include livestreaming using the sound coming out of USB. But before I even get there, I tried to do a simple test and ran into issues. I connected my DJ controller from it's Master RCA out (it only has one output) to the 2TR IN on the mixer, I then connected the mixer via RCA from the 2TR OUT to my amp which then powers the speaker. I pushed the 2TR to Main Mix button. I see the level lights moving. I can hear the sound in the Phones but NOT via the amp. (The wires are working fine. If I plug in the controller directly to the amp bypassing the mixer, sound comes out of the amp/speakers. I know there is no issue of wiring or amp or source sound via the controller.) I conducted a test where I plugged in a microphone into Mic 1 of the mixer via 1/4" connection. I can hear the mic via the amp/speakers. I don't understand why the 2TR input is not being outputted via 2TR (RCA). Does anyone have an suggestions? It seems to me that you can not input into 2TR and output at the same time. But this doesn't make any sense as the OUT is a parallel signal of the main mix and shouldn't have anything to do with the input being 2TR. I've ordered RCA to 1/4" cables so I can plug them directly into Line connections using 1/4" plugs. I won't get these cables for a few days from Amazon. This will then let me "record" or livestream out of my laptop via the USB connection as I understand NOW (after buying this mixer) that the Main mix is muted out to the USB when the 2TR/USB button is pressed to out to Main Mix. But I'd still like to be able to get 2TR IN and OUT working as I can see need for this connections when DJ'g. Ex. If a videographer wants direct sound from the event, I can connect them via 2TR OUT using RCA. I should be able to connect the RCA out from the DJ controller into the 2TR IN as well.