Thanks guys! Really helpful stuff. I'll do some experimenting with the Edit app (which I've already downloaded) and see how it goes. Craig Fowler;139680 wrote: Routing>Out1-16 Stage the first 16x signals you'd like, at whatever tap points. Routing>Ultranet Stage the second 16x signals you;d like, at whatever tap points. Routing>Card Out Output1-8: out1-8 Output9-16: out9-16 Output17-24: P16 1-8 Output25-32: P16 9-16 Routing>aux out Stage whatever signals you'd like to appear on the console's local aux out sockets Routing>xlr out Dump the aux out blocks here to get the signals from aux out block staged above to the console's XLR outputs. NB with an x-dante card you'll have to set the Dante card as the console's clock master: Setup>Global Synchronization:ExpCard. I'd recommend downloading the Edit app and playing around with it to see what's possible with the routing.
Hello! This is my first post and I'm hoping the experts out there can help me. We're getting ready to purchase an M32 console and our plan is to put in the X-DANTE card. I'd like to know if it's possible, and how, to configure the 32 different DANTE outputs with various signals from the board. For example, we'd like DANTE output #1 to be the signal from Channel 11, pre-fader. Another would be DANTE output #7 to be the signal from MixBus 3, post fader, and so on. I hope the question makes sense. Thanks for the help! -Matt