So I was able to see the bands rig in person and its setup way different then I thought X32 rack is as follows Channel 1-16 local They use the Rack as outputs for their IEMs S16 is setup for channels 17-32 in their rack mixer They use the outputs on the S16 for FOH They use AES50 A from S16 to Rack So how do I get all the inputs to my X32? I tried a few things and was only able to get rack inputs 1-8 to come to my x32 I could not control the FOH with my mixer One more thing how do I set up the preamp gain so I can control it.
Running sound for a band coming in two weeks. They have a x32 rack they use with a S16. I am going to run FOH with my personal X32. They route drums only channel 1-8 on Rack X32, everything else VOX, and guitars are plugged in to S16 channels 9-16. They use outputs on Rack mixer for IEM's and outputs on S16 for FOH. They run 4 IEM stereo packs with take up 8 outs alone. How do I config everything where I have Channels 1-32 on my FOH X32 and I want to route back to their S16 for my Sub, L and R out and all their IEM outs to the X32 rack. I have connected to a single S16 a handful of times so I understand that. I'm not sure how to add the x32 rack and s16 together if that makes any sense while getting my outs split up in to two different locations.